 |
|
General Specifications-Standard
Framo Morat Miniline 3
| |
Painted steel exterior
Internal integrated limit switches
Stroke length from 500 mm
Stroke speed from 1.3 to 140 mm/s
Stroke force from 2650 to 26000N
Splash Proof IP54
Maintenance-free
Lifetime Lubrication |
 |
Options:
Painted steel exterior
Force limiter, brake, potentiometer, encoder
Planetary gears(up to 3 stages)
230V / 460VAC 60Hz 3-phase Motors
Rod end options |
175 mm Stroke
| Dimension |
mm (in) |
| a |
53.1 |
(2.1) |
| b |
35.1 |
(1.4) |
| c-1st stg |
373.1 |
(14.7) |
| c-2nd stg |
407.9 |
(16.1) |
| c-3rd stg |
443.0 |
(17.4) |
| d |
20.1 |
(0.8) |
| e |
39.9 |
(1.6) |
| f |
39.1 |
(1.5) |
| g |
128.0 |
(5.0) |
| h |
20.1 |
(0.8) |
| i |
50.0 |
(2.0) |
| j |
20.1 |
(0.8) |
| k |
PG11 |
PG11 |
| l |
sp |
sp |
| m |
11.9 |
(0.5) |
| n |
35.1 |
(1.4) |
| o |
134.1 |
(5.3) |
| p |
184.9 |
(7.3) |
| q |
161.0 |
(6.3) |
| r |
13.0 |
(0.5) |
| s |
35.1 |
(1.4) |
| t |
59.9 |
(2.4) |
| u |
M20 |
M20 |
| v |
149.1 |
(5.9) |
| w |
180.1 |
(7.1) |
| x |
161.0 |
(6.3) |
| y |
13.5 |
(0.5) |
|
|
Stroke
Length
For longer
stroke length please add the corresponding dimension y
from the tables below.
| |
Stroke
length
|
mm |
175
|
250 |
300
|
350 |
400
|
450 |
500 |
y
|
0
|
75 |
125
|
175 |
225
|
275 |
325 |
Stroke
length
|
in |
6.9
|
9.8 |
11.8
|
13.8 |
15.8
|
17.7 |
19.7 |
y
|
0
|
3.9 |
5.9
|
6.9 |
8.9
|
10.8 |
12.8 |
|
Options like brakes, encoders,
potentiometers and force limiters add length to the
cylinder body. Please contact Concise Motion Systems
to obtain dimensions when options are included.
|
|
230VAC or 460 VAC 60 Hz, Three Phase Performance
Table
| Motor Speed RPM |
Motor
Power
KW (HP) |
Duty Cycle % |
Stroke
Speed
mm/s (in/s) |
Gear Ratio |
Gear Stages |
Pitch
of Screw
mm |
Stroke Length |
175mm
(7") |
250-300mm
(9.8-11.8") |
350-400mm
(
13.8 -15.8") |
450-500
mm
(17.7-19.7") |
| Maximum stroke force N (lbs) |
| N (lbs) |
N (lbs) |
N (lbs) |
N (lbs) |
| 1680 |
1.5 (2.0) |
15 |
140.4 (5.5) |
1.0:1 |
1:01 |
28x5 Ss |
2650 (596) |
2650 (596) |
2650 (596) |
2650 (596) |
| 1680 |
1.5 (2.0) |
15 |
84.0(
3.3) |
1.0:1 |
1:01 |
28x3 Sd |
3500 (788) |
3500 (788) |
3500 (788) |
3500 (788) |
| 1680 |
1.5 (2.0) |
15 |
56.4 (2.2) |
4.1:1 |
1-st. |
28x8 Ss |
8100 (1823) |
8100 (1823) |
8100 (1823) |
8100 (1823) |
| 1680 |
1.5 (2.0) |
15 |
34.8 (1.4) |
4.1:1 |
1-st. |
28x5 Sd |
8900 (2003) |
8900 (2003) |
8900 (2003) |
8900 (2003) |
| 1680 |
1.5 (2.0) |
15 |
21.0 (0.8) |
4.1:1 |
1-st. |
28x3 Sd |
9900 (2228) |
9900 (2228) |
9900 (2228) |
9900 (2228) |
| 1680 |
1.5 (2.0) |
15 |
14.4 (0.6) |
16.0:1 |
2-st. |
28x8 Ss |
20000 (4500) |
20000 (4500) |
19400 (4365) |
13120 (2952) |
| 1680 |
1.5 (2.0) |
15 |
8.8 (0.3) |
16.0:1 |
2-st. |
28x5 Sd |
20000 (4500) |
20000 (4500) |
20000 (4500) |
20000 (4500) |
| 1680 |
0.75 (1.0) |
40 |
5.3 (0.2) |
16.0:1 |
2-st. |
28x3 Sd |
20000 (4500) |
20000 (4500) |
20000 (4500) |
20000 (4500) |
| 1680 |
0.5 (0.7) |
50-60 |
3.5 (0.1) |
64.0:1 |
3-st. |
28x8 Ss |
26000 (5851) |
26000 (5851) |
19400 (4365) |
13120 (2952) |
| 1680 |
0.5 (0.7) |
50-60 |
2.2 (0.1) |
64.0:1 |
3-st. |
28x5 Sd |
26000 (5851) |
26000 (5851) |
26000 (5851) |
20000 (4500) |
| 1680 |
0.5 (0.7) |
50-60 |
1.3 (0.1) |
64.0:1 |
3-st. |
28x3 Sd |
26000 (5851) |
26000 (5851) |
26000 (5851) |
26000 (5851) |
|
NOTES:
So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
At stroke speeds greater than 20 mm/sec a brake is strongly recommended.
Duty cycle applies to 10 minute operating time.
For tensile loading applies the maximum stroke force of the particular stroke speed.
Actuators with single phase motors reach only 60% of the force and motor power of those with
3-phase motors and 15 % stated duty cycle.
The force and motor power stated at 40% and 60% won't change if the actuator is operated at
15% duty cycle.
Back to Miniline Main Page
Download Technical Documentation [pdf]
|
|
