| Industry |
Application |
Crane Construction Equipment:
The linear drive Mini 0 is used to release the brakes of the rotary drives of cranes. |
A linear drive releases the brake of the turn mechanism and allows the boom to turn in the direction of the wind (principle of a weathercock). This mechanism reduces the danger of a crane being blown down by the wind drastically. The Mini is the perfect solution for this application due to its small size and high service life.
|
Architecture-Buildings:
Mini 01 is used for air-conditioning in buildings with big glass-surfaces. |
Big glass-surfaces are automatically opened and closed for climate control .The design of the drive was the decisive factor for this application among general demands like small size, high service-life and silent operation.
|
Automotive/Machinery:
Mini 2 is used for tool adjustment on a wheel-rim machine. |
In order to compensate progressing wear out of the machine tools the process parameters are being trimmed by Mini 2 permanently. Therefore a constant quality of the wheels manufactured is guaranteed.
|
Printing/Packing:
The Mini 2 is used to press a pile of papers down in order to tie them up. |
The slip-on geared motors Compacta are used in the pharmaceutical industry for the production of blood sugar measuring tapes. The Compacta AG60 moves the swivel arm in an angle of 90°. Then a conveyor belt - driven by the Compacta MR6 - removes the product |
| Industry |
Application |
Printing:
The rotary drive Compacta MS12 is used to change the format in a sorting machine. |
Drive of an acme-screw for adjusting a sorter to the desired print-format with position-feedback and limit switches.The Compacta MS12 is the ideal drive component for this application due to small weight, compact design and the flexible integrated controls.
|
Magnetic elevation technique:
A Compacta MS12 moves the gripper of the magnet travers. |
The magnetic elevation technique is used for the rational handling of steel. To fit for different forms of loads the gripper needs to be flexible. The slip-on geared motor Compacta moves the magnets into position.
|
Architecture-Windows:
The Compacta MS12 moves the sunshades of a facade. |
The slip-on geared motors Compacta MS12 moves the glass scale louvers at the facade of a school. By using another gear-box, combined with a rack and pinion, the glass scale louvers can be adjusted just by one drive.
The attractive design, corrosion resistance, jet water protection and the compact design with integrated limit switches were decisive for this application.
|
Handling:
The Compacta MR30 is used for swivel moves of up to 360° in different handling devices.
|
Drive for swivel axis of handling machines. The operator can turn the goods into the perfect ergonomic position by jogging. The internal end-of travel limit switch protect the handling system. The Compacta MR30 is a very suitable drive solution for this kind of application due to its small size, low weight as well as internal limit switches and motor contactors.
|
Handling:
Lubricant Application System for aluminum die-casting machines. |
The Compacta AG60 is driving a reciprocating spraying system on aluminum die casting machines (120° turns). The drive has limit switch version 3 to get end-of-travel switches as well as intermediate switches for the inverter deceleration ramp signals.
|
Automotive:
The Compacta AG 60 in combination with a push-pull chain type 40 PSR is raising and lowering a platform lift on an AGV. |
The AG60 in combination with a Push-Pull chain Type 40 PSR is used to raise and lower an assembly platform infinitely to keep the car engine on the platform on an ergonomic assembly level.
The combination of the rotary drive Compacta and the Push-Pull chain is the perfect solution for applications with long strokes and small space.
|
Pharmaceutical-Material Handling:
The Compacta AG60 moves the swivel arm, the Compacta MR6 drives a conveyor belt. |
The slip-on geared motors Compacta are used in the pharmaceutical industry for the production of blood sugar measuring tapes. The Compacta AG60 moves the swivel arm in an angle of 90°. Then a conveyor belt - driven by the Compacta MR6 - removes the product. |
| Industry |
Application |
Material Handling-Furnace:
The Push-Pull Chain is used to forward a load of work piece in and out of furnaces. |
Furnace feeder car with 2 different operating levels. The Push-Pull Chain is used to manually push the goods into the oven. The chain also hosts a cable to a magnetically operated hook on the front link which releases and engages the goods inside the furnace.
|
Material Handling-Lift Table:
The Push-Pull Chain is used to raise and lower the table top. The Compacta MR30 is used as drive. |
A Compacta MR30 in combination with a Push-Pull Chain type 40 PSG drives a platform lift. Push-Pull Chains are more and more used for scissors lifts and other industrial lifts in particular on oil-free applications or automatic platforms. Platform positioning is made very easy with the Push-Pull Chain.
|
Material Handling-Heat Treatment Furnaces:
The Push-Pull Chain is used to forward a load of work piece in and out of furnaces. |
The Push-Pull Chain picks up the load at the furnace entrance and forwards it over the basin into the furnace. During the heat treatment process the chain is stored outside the oven. It is stored upwards between wall and furnace. For this application the small storage-room of the Push Pull chain was decisive. For similar applications chains of annealed steel were used. |
